TetherInvert manual#
TetherInvert scans film negatives with a digital camera on a copy stand. It drives the camera and if supported the light. It can shoot each frame under red, green and blue light one after the other, and writes 16-bit TIFFs: a calibrated, repeatable starting point for every frame of a roll, ready in Lightroom Classic or any editor you like.
If you do not have a controllable light you can tether scan with a normal light, too.
This manual is for photographers who already scan film with a camera. It does not explain copy stands, holders or focusing; it explains what TetherInvert does and how to work with it.
What it does#
- Calibrates once per film stock. The film base is exposed to the right in red, green and blue alike, so the white balance is set by the film itself.
- Scans fast. Space bar, next frame. A 36-frame roll takes 11 minutes to scan and under 25 minutes from the first scan to the contact sheet, with the frames developed. Calibration, once per film stock, is not counted.
- Corrects uneven light. A flat field per session, taken without film.
- Writes a flat master. Every frame is saved as a flat positive with nothing clipped and no curve: the start for your own editing.
- Develops and prints, if you want. A base per frame and corrections modelled on the controls of the Fujifilm Frontier SP-3000 (density, colour, contrast, saturation, tone), seen on screen and written as prints in one batch. Enough for a finished print, or a better start for the next editor.
- Keeps the grain. No noise reduction, no sharpening.
- Records the film's metadata. Camera, lens, film stock, EI, developer, dates, notes and keywords go into every file. The camera on the copy stand is kept apart, so Lightroom shows the camera you shot the film with.
- Makes a contact sheet of the roll as PDF and PNG, for the archive.
- Works with Lightroom Classic (macOS): a hot folder adds the files as they appear, and a plug-in shows the film and scan fields in the Metadata panel.
Where it fits#
NegPy and Negative Lab Pro are excellent conversion tools, and TetherInvert owes a lot to NegPy. TetherInvert does less, on purpose: scan a roll quickly under RGB light, give every frame a calibrated starting point, keep the roll's metadata, make the contact sheet, then hand over to the editor you already know.
Before you start#
- macOS or Linux. The Lightroom integration is macOS only. There is no Windows version (the camera library, libgphoto2, has none).
- A camera that libgphoto2 can control, shooting RAW.
- A light. TetherInvert drives the Scanlight directly. Any other light works too, set by hand. See Lights.
- In active development. Things can change and break between versions.
A roll, start to finish#
The working pages are sequences of steps with screenshots; the numbers in the screenshots are the ones in the text.
- Install TetherInvert.
- Get to know the window: a rail of steps, Roll, Scan, Develop and Finish, with Presets, Lightroom and the devices at its foot.
- Choose how you light the film: Lights.
- Read How TetherInvert thinks once: five ideas the rest builds on.
- Set up your rig.
- Calibrate once per film stock.
- Start a session: name the roll, fill in its metadata, start, take the flat field.
- Scan the roll.
- Develop the frames.
- Finish the roll: print it, make the contact sheet, and correct the metadata if needed.
- Work on in Lightroom Classic, or any editor.
Also: the command line, when something fails.
The screenshots show the simulated rig that comes with TetherInvert (tetherinvert --sim gui): its
negatives are made from ordinary photos, not scanned from film, so they say nothing about the
colours a real rig gives.